Configurations
EnPak A30GBW gas, A30GBW diesel, and A30GBW diesel with the cold weather package. All include air, generator, battery charge/crank assist, chassis power, and weld output.
Miller Stick / Engine-Drive Support
Miller EnPak A30 Series Machine Support
Miller EnPak A30 Series support for the gas and diesel engine-driven air compressor, generator, battery charger, crank assist, chassis power, and integrated welding configurations listed in ED/15.0.
A30GBW gasA30GBW diesel30 cfm compressor8,000 W peak12/24 V charge / crankKohler or Kubota engine
Air compressor
Rotorcomp rotary-screw compressor. 30 cfm at 120 - 175 psi, 100% duty cycle, with 20 cfm at idle.
Generator power
8,000 W peak and 6,500 W continuous single-phase generator power.
Battery support
12/24 V battery charge at 100 A and crank assist at 300 A. Chassis power is standard.
Welding
DC Stick/TIG output from 30 - 210 A; MIG/flux-cored output from 15 - 25 V, 210 A with a wire feeder.
Engine choices
Kohler EFI ECH730 gas engine or Kubota D722 diesel engine. The diesel package adds factory-installed cold-weather options when selected.
Model and Package Selection
The supplied ED/15.0 document defines three EnPak A30 stock packages. Match the machine label, fuel type, cold-weather package, and stock number before ordering accessories.
| Stock number | Catalog package |
|---|---|
| 907772 | EnPak A30GBW Gas Kohler gas engine, air compressor, generator power, battery charge/crank assist, chassis power, and integrated multiprocess welding. |
| 907759 | EnPak A30GBW Diesel Kubota diesel engine, air compressor, generator power, battery charge/crank assist, chassis power, and integrated multiprocess welding. |
| 907759001 | EnPak A30GBW Diesel Cold Weather Package A30GBW diesel package plus factory-installed diesel fuel heater, compressor oil heater, and cold-weather equipment. |
Maintenance, Covers, and Ready-To-Work Package
These are the maintenance, cold-weather, cover, and accessory kit part numbers called out in ED/15.0.
| Part / stock | Item | Catalog note | Buy / lookup |
|---|---|---|---|
| 301539 | Control Panel Extension Cable Control panel accessory | 15-foot control panel extension cable. | Search Amazon Site lookup |
| 301598 | Auxiliary Fuel Pump Fuel accessory | Auxiliary fuel pump for gas models. | Search Amazon Site lookup |
| 301543 | Protective Cover Machine cover | Heavy-duty protective cover for gas models. | Search Amazon Site lookup |
| 301544 | Protective Cover Machine cover | Heavy-duty protective cover for diesel models. | Search Amazon Site lookup |
| 301448 | Air Compressor Oil Heater Cold-weather accessory | For use in ambient temperatures less than 10 F (-10 C). | Search Amazon Site lookup |
| 301538 | Diesel Fuel Heater / Cold Weather Kit Cold-weather accessory | For diesel models; adds diesel fuel heating and cold-weather support. | Search Amazon Site lookup |
| 275644 | Air Compressor Service Kit Compressor maintenance | Compressor oil filter, inlet air filter, oil/air separator, and compressor oil. | Search Amazon Site lookup |
| 284119 | Gas Engine Filter Kit Gas engine maintenance | Oil filter, spark plugs, air filter, and fuel filter. | Search Amazon Site lookup |
| 284101 | Diesel Engine Filter Kit Diesel engine maintenance | Oil filter, air filter, and fuel filter. | Search Amazon Site lookup |
| 951858 | Ready To Work Accessory Kit Accessory kit package | Auxiliary power remote panel, battery charge/jump cables, and 50-foot weld cables with Tweco-style male connectors plus an electrode holder or work clamp. | Search Amazon Site lookup |
Air, Generator, and Battery Accessories
The compressor installation requires a 10-gallon minimum air reservoir that is not provided by Miller. The catalog also lists air-drying, auxiliary power, and 12/24 V battery cable paths.
| Part / stock | Item | Catalog note | Buy / lookup |
|---|---|---|---|
| 301488 | Air Dryer Kit Air compressor accessory | Cools and removes moisture from the air supply. Not recommended below 32 F (0 C). | Search Amazon Site lookup |
| 300690 | Desiccant Air Dryer System - 30 Air compressor accessory | Regenerating inline air dryer system that eliminates moisture in the air stream to prevent air-tool freeze-ups in cold climates. | Search Amazon Site lookup |
| 301562 | Auxiliary Power Remote Panel Generator power accessory | Two 120 V receptacles with breakers and one 120/240 V, 50 A receptacle. Cabling is not included. | Search Amazon Site lookup |
| 119172 | Full KVA Plug Kit Generator power accessory | 120/240 V, 50 A NEMA 14-50P plug for the full KVA receptacle. | View on Amazon Site lookup |
| 282067 | GFCI Receptacle Generator power accessory | 15/20 A receptacle with mounting tabs. | Search Amazon Site lookup |
| 300517 | Full KVA Adapter Cord Generator power accessory | NEMA 14-50P to NEMA 6-50R adapter for common Millermatic and Spectrum 240 V plugs. | View on Amazon Site lookup |
| 300422 | Battery Charge / Jump Cables with Plug Battery charge/crank assist accessory | 25-foot cable set for the 12/24 V battery charge and crank-assist system. | View on Amazon Site lookup |
Weld, Feeder, Spool Gun, and Plasma Paths
The A30 welding output supports DC Stick, DC TIG, MIG, and flux-cored work. Wire feeder, spool-gun, and plasma paths require the appropriate A30 weld configuration and auxiliary power where noted.
| Part / stock | Item | Catalog note | Buy / lookup |
|---|---|---|---|
| 301566 | 2/0 Weld Cable Sets Weld cables and connectors | 350 A, 100% duty cycle; 50-foot cables with Tweco-style male connectors and an electrode holder or work clamp. | Search Amazon Site lookup |
| 195457 | 2/0 Weld Cable with Electrode Holder Weld cable | 400 A, 100% duty cycle; 10-foot cable with Tweco-style male connector and stud/Tweco adapter. | Search Amazon Site lookup |
| 195458 | 2/0 Weld Cable with Work Clamp Weld cable | 400 A, 100% duty cycle; 10-foot cable with Tweco-style male connector and stud/Tweco adapter. | Search Amazon Site lookup |
| 195456 | 2/0 Weld Cable Extension Weld cable extension | 50-foot cable extension for 195457 and 195458. Two are needed for a complete set. | Search Amazon Site lookup |
| 191981 | Tweco-Style Connector Weld connector | Male Tweco-style plug with cable capacity of #1/0 to #2/0 AWG. | Search Amazon Site lookup |
| 951726001 | ArcReach SuitCase 8 with Bernard BTB Gun Wire feeder | 300 A ArcReach feeder package; weld-capable A30 weld configurations only. | Search Amazon Site lookup Feeder support |
| 951727001 | ArcReach SuitCase 8 with Bernard S-Gun Wire feeder | ArcReach feeder package; A30 weld configurations only. | Search Amazon Site lookup Feeder support |
| 951728 | ArcReach SuitCase 8 with Bernard Dura-Flux Gun Wire feeder | Flux-cored ArcReach feeder package; A30 weld configurations only. | Search Amazon Site lookup Feeder support |
| 951729001 | ArcReach SuitCase 12 with Bernard BTB Gun Wire feeder | 300 A ArcReach feeder package; A30 weld configurations only. | Search Amazon Site lookup Feeder support |
| 951730001 | ArcReach SuitCase 12 with Bernard S-Gun Wire feeder | ArcReach feeder package; A30 weld configurations only. | Search Amazon Site lookup Feeder support |
| 951731 | ArcReach SuitCase 12 with Bernard Dura-Flux Gun Wire feeder | Flux-cored ArcReach feeder package; A30 weld configurations only. | Search Amazon Site lookup Feeder support |
| 130831 | Spoolmatic 30A Spool Gun Spool gun | Rated at 200 A, 100% duty cycle with a 30-foot cable. | Search Amazon Site lookup Spool gun support |
| 300497 | Spoolmate 200 Spool Gun Spool gun | Rated at 160 A, 60% duty cycle with a 20-foot cable. | Search Amazon Site lookup Spool gun support |
| 132228 | Extension Hose and Cable Kit Spool gun accessory | 25-foot extension for Spoolmatic 30A and Spoolmate 200 spool guns. | Search Amazon Site lookup |
| 31-50-580 | Flow Gauge Regulator Spool gun accessory | 0 - 50 scfh argon/CO2 flow gauge regulator. | Search Amazon Site lookup |
| 951000202 | Venture 150 S Portable battery-powered welder | Portable battery-powered stick/TIG welder with 400 Wh battery pack, charger, cables, holder, clamp, and shoulder strap. | Search Amazon Site lookup Venture 150 support |
| 907529 | Spectrum 375 X-TREME Plasma cutter | Portable plasma cutter with protective X-CASE; auxiliary power remote panel required for the EnPak installation. | Search Amazon Site lookup Plasma support |
Catalog Source and Ordering Note
Source: Miller EnPak A30 Series literature ED/15.0, issued March 2026. Accessory relationships, model restrictions, installation notes, and package descriptions are based on the supplied document. Verify fuel type, stock package, integrator cabling, air reservoir, installation requirements, and current availability before ordering.
Full machine details
Air Compressor and Generator
- Rotorcomp rotary-screw compressor: 30 cfm at 120 - 175 psi, 100% duty cycle; 20 cfm at idle
- 8,000 W peak and 6,500 W continuous single-phase generator power
- Compressor shutdowns: high pressure at 200 psi and high temperature
Engine and Battery
- Gas: Kohler EFI ECH730, 23 hp at 3,600 rpm; twin-cylinder industrial air-cooled gasoline engine
- Diesel: Kubota D722, 19 hp at 3,600 rpm; three-cylinder liquid-cooled diesel with 60 A alternator
- 12/24 V battery charge at 100 A and crank assist at 300 A; chassis power is standard
Size and Welding Output
- Machine: H 28 in., W 20 in., D 47 in.; gas net weight 530 lb.; diesel net weight 624 lb.
- DC Stick/TIG output range: 30 - 210 A
- MIG/flux-cored output: 15 - 25 V, 210 A with a wire feeder
Source: Miller EnPak A30 Series literature ED/15.0, issued March 2026. Machine specifications, model packages, installation notes, and accessory relationships are based on the supplied document. Confirm fuel type, stock package, integrator cabling, air reservoir, package contents, and current availability before ordering.
Approved Buy Links
OEM-backed Amazon Links
Full KVA plug kitPart: 119172
View on AmazonBattery charge / jump cables with plugPart: 300422
View on AmazonFull KVA adapter cordPart: 300517
View on Amazon